08-14-07: Question: "When is a 600 horsepower Mustang not a 600
horsepower Mustang?" Answer: "When you can't transfer all that power to the
ground!"

The weakest link between a vehicle's engine and its wheels is the
driveshaft. Stock driveshafts can easily manage a few hundred horsepower
but limit the potential of more potent performers. Luckily, Fidanza has the
solution - new performance driveshafts for muscular 2005-2007 Ford Mustangs
(GT, Shelby GT500, 5-6 speed).

Fidanza's 3.5" diameter aluminum Mustang driveshafts are rated for up to 600
(#586486) and 900 (#586489) horsepower, have none of the clearance issues
associated with larger driveshafts and feature a superior joint design for
increased strength. As well, the aluminum shafts weigh only 16 lbs. (32
lbs. less than stock!). The result is less rotating mass and less wasted
horsepower in the drivetrain.

"The stock driveshaft also uses a hanger bearing that tends to travel in a
violent 'up and down' motion when the pedal is mashed," said Bob Scheid,
vice president, Fidanza. "Our new Mustang units eliminate this problem."

Also available from Fidanza are 3" diameter steel driveshafts rated for up
to 600 (#586686) and 900 (#586689) horsepower. The steel units, with all
the same benefits of the aluminum shafts, weigh-in at 20 lbs. and sell for a
lower suggested retail price.

Finally, Fidanza is also offering a 3" diameter steel driveshaft for the
2005-2007 Ford Mustang V6 5-speed (#586466). It is rated for up to 600
horsepower and weighs 20 lbs.

"Why try to make more horsepower when you can't use what you already have?"
added Scheid. "It makes no sense and wastes a lot of money. Before you
boost your Mustang to new heights, make sure it has the right equipment to
reach them."

All Fidanza Ford Mustang driveshaft kits come complete with everything
needed for installation.

For more information, or to locate a distributor near you, visit Fidanza at
www.fidanza.com.

With ground-breaking new designs, the latest manufacturing technologies and
the most advanced materials, Fidanza consistently leads the way in producing
high-quality aluminum flywheels, clutches, cam gears, flex plates, CV
shafts/driveshafts and short throw shifters for track, tuner and street
applications. Fidanza markets more than 700 SKUs for this growing industry,
many of which are SFI-approved.